Torque and Sequence

INTAKE MANIFOLD COLLECTOR












INTAKE MANIFOLD COLLECTOR

- If stud bolts were removed, install them and tighten to the torque specified below.

Torque : 10.8 N.m (1.1 kg-m, 8 ft-lb)





Arrow Indicates Engine Front

- Tighten mounting bolts and nuts in numerical order as shown in the figure.



INTAKE MANIFOLD

- If stud bolts were removed, install them and tighten to the torque specified below.

Torque : 10.8 N.m (1.1 kg-m, 8 ft-lb)





Arrow Indicates Engine Front

- Tighten all mounting bolts to the specified torque in two or more steps in numerical order as shown in the figure.

CAUTION:
Install intake manifold with the marks (put on the intake manifold and the cylinder head before removal) aligned.