Removal And Installation

FRONT SUSPENSION MEMBER


Removal and Installation


REMOVAL
1. At first, remove engine and transmission assembly with front suspension member downward. Then separate engine, transmission assembly and front suspension member. Exploded View.
2. Remove the following parts.
- Steering knuckles and wheel hub and bearing assemblies. Exploded View.
- Steering gear assembly and hydraulic line. Exploded View, Service and Repair.
- Stabilizer bar and stabilizer connecting rods. Exploded View.
- Transverse links. Exploded View.
- Remove suspension member stay.
- Remove suspension member sub stays.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Perform final tightening of bolts and nuts at the vehicle installation position (rubber bushing), under unladen condition with tires on level ground.