Service Procedure

NOTE:
^ Most instructions for reprogramming with CONSULT-III plus (C-III plus) are displayed on the CONSULT PC screen.

^ If you are not familiar with the reprogramming procedure, refer to "CONSULT- III plus (C-III plus) ECM Reprogramming" general procedure.

^ Take the vehicle for a 10 minute drive in order to meet the following Idle Air Volume Learn (IAVL) conditions:





> Engine coolant temperature: 70-100°C (158-212°F)

> Battery voltage: More than 12.9V (At idle)

> Transmission: Warmed up

^ After reprogramming is complete, you will be required to perform Throttle Valve Closed Position, Idle Air Volume Learn, Accelerator Closed Position, and DTC erase.





CAUTION




















SERVICE PROCEDURE

ECM recovery:

Do not disconnect plus VI or shut down CONSULT III plus if reprogramming does not complete.





If reprogramming does not complete and the "!?" icon displays as shown in Figure 5 shown above and information shown above.





If reprogramming does not complete and the "X" icon displays as shown in Figure 6 shown above and information shown above.