Disassembly

SHIFT FORK AND FORK ROD


Disassembly

For disassembly procedures other than the following items, refer to "SHIFT FORK AND FORK ROD" in Without S-Mode (Without S-MODE) or With S-Mode (With S-MODE).

CHECK SHIFT PIN





Set the control bracket to a vise and then remove check shift pin (1) from control bracket.

STRIKING ROD





1. Remove retaining pin (Black arrow), using a pin punch [Commercial service tool] and then remove stopper ring from striking rod.

White arrow indicates Transmission front






2. Remove retaining pin (Black arrow), using a pin punch [Commercial service tool] and then remove low/high control lever from striking rod.