Removal And Installation

TRUNK ROOM TRIM & TRUNK LID FINISHER


Removal and Installation


REMOVAL
1. Remove trunk net rear and trunk net side (if equipped).
2. Remove trunk floor carpet.
3. Remove trunk front finisher.
4. Release the clips, then remove trunk rear finisher.
5. Release the clips, then remove trunk side finisher (RH/LH).
6. Remove spare tire cover.
7. Remove the trunk lid rubber bumper (RH/LH), then release the clips and remove trunk lid finisher.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Make sure that clips are fully aligned with panel holes on body when installing, then press them in completely.