Spark Plug: Service and Repair

SPARK PLUG


Removal and Installation












REMOVAL
1. Remove the ignition coil. Service and Repair.





2. Remove the spark plug with a suitable spark plug wrench.

INSPECTION AFTER REMOVAL





- Do not use a wire brush for cleaning the spark plugs. Replace as necessary.
- If plug is covered with carbon, a spark plug cleaner may be used.










- Checking and adjusting plug gap is not required between change intervals. If the gap is out of specification, replace the spark plug.

Gap (nominal) : 1.1 mm (0.043 in)

INSTALLATION
Installation is in the reverse order of removal.