Front Stabilizer

FRONT STABILIZER


Removal and Installation


REMOVAL
1. Remove steering gear. Removal And Installation.





2. Remove the stabilizer connecting rod nuts from the strut.
3. Remove stabilizer clamp bolts.
4. Remove stabilizer bar.

INSPECTION AFTER REMOVAL
Check stabilizer bar, connecting rod, bushing and clamp for deformation, cracks and damage, and replace as necessary.

INSTALLATION
Installation is in the reverse order of removal. Exploded View for tightening torque specifications.





- When installing stabilizer bar, make sure that the clamps are facing in the direction as shown.
- Make sure the cut surface of the stabilizer bushing faces the rear of the vehicle.





- Stabilizer bar uses pillow ball type connecting rod. Position ball joint with case on pillow ball head parallel to stabilizer as shown.
- Adjust toe. Front Suspension Assembly.