Charging/Testing an Altima Hybrid 12-Volt Battery

CHARGING / TESTING AN ALTIMA HYBRID 12-VOLT BATTERY

CAUTION:
^ The Midtronics GR-8 must be used to charge and/or test the Altima Hybrid 12-volt battery. (Make sure to select Altima Hybrid.)

^ Do not quick-charge the Altima Hybrid 12-volt battery. This battery is a "sealed-type" battery and should never be quick-charged.

^ Do not attempt to charge or test the Altima Hybrid 12-volt battery using the positive stud and strut mount bolt as described in the Jump-Starting an Altima Hybrid with a Discharged 12-Volt Battery portion of this bulletin.

^ Do not attempt to charge or test the Altima Hybrid 12-volt battery through the RH inner trunk access panel. The RH trunk side finisher MUST BE REMOVED prior to charging / testing.

1. Remove the RH trunk side finisher.

2. Confirm the trunk lid is completely open.

3. Connect the GR-8 to the battery.





4. Perform necessary charging / testing:

^ Follow the GR-8 user guide.

^ Make sure to select by model the Altima Hybrid.