Sedan With Intelligent Key
B261E VEHICLE TYPE
Description
There are two types of vehicles.
- HEV
- Conventional
DTC Logic
DTC DETECTION LOGIC
NOTE:
- If DTC B261E is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to Sedan With Intelligent Key.
- If DTC B261E is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to Sedan With Intelligent Key.
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON under the following conditions.
CVT models
- Selector lever is in the P or N position
- Do not depress brake pedal
M/T models
- Do not depress clutch pedal
2. Check "Self-diagnostic result" using CONSULT-III.
Is DTC detected?
YES - Go to Sedan With Intelligent Key.
NO - Inspection End
Diagnosis Procedure
1.INSPECTION START
1. Turn ignition switch ON.
2. Check "Self-diagnostic result" using CONSULT-III.
3. Touch "ERASE".
4. Perform DTC Confirmation Procedure.
See Sedan With Intelligent Key.
Is the 1st trip DTC B261E displayed again?
YES - Replace BCM. Refer to BCM.
NO - Inspection End