Coupe

FRONT BUMPER


Removal and Installation












REMOVAL
1. Partially remove the front fender protectors RH and LH. Refer to Coupe.
2. Remove the engine under cover.
3. Remove the RH and LH side under covers.
4. Remove the fog lamp if equipped. Refer to Service and Repair.
5. Remove the front bumper fascia clips and screws, then remove the front bumper fascia.
6. Remove the front grille. Refer to Coupe.
7. Remove the front energy absorbing foam.
8. Remove the front bumper reinforcement and reinforcement bracket.
9. Remove the front bumper supports.

INSTALLATION
Installation is in the reverse order of removal.