Coupe

DOOR LOCK AND UNLOCK SWITCH


PASSENGER SIDE : Description

Transmits door lock/unlock operation to BCM.





DOOR LOCK AND UNLOCK SWITCH


PASSENGER SIDE : Diagnosis Procedure (With LH Anti-Pinch Only)

Regarding Wiring Diagram information, refer to Coupe.
1.CHECK POWER WINDOW SWITCH OUTPUT SIGNAL
1. Turn ignition switch ON.





2. Check voltage at the power window and door lock/unlock switch
RH connector when the switch (passenger side) is turned to "LOCK" or "UNLOCK".





Is the inspection result normal?
YES - GO TO 5
NO - GO TO 2
2.CHECK POWER WINDOW SWITCH GROUND
1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH connector.





3. Check continuity between power window and door lock/unlock switch RH connector and ground.





Is the inspection result normal?
YES - GO TO 3
NO - Repair or replace harness.
3.CHECK POWER WINDOW SWITCH





Check continuity between power window and door lock/unlock switch RH terminals.





Is the inspection result normal?
YES - GO TO 4
NO - Replace power window and door lock/unlock switch RH.
4.CHECK POWER WINDOW SWITCH CIRCUITS
1. Disconnect BCM connector.





2. Check continuity between BCM connector and power window and door lock/unlock switch RH connector.





3. Check continuity between BCM connector and ground.





Is the inspection result normal?
YES - GO TO 5
NO - Repair or replace harness.
5.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- Inspection End.