Low-Pressure Pipe

LOW-PRESSURE PIPE


Removal and Installation for Low-Pressure Pipe


QR25DE

Removal
1. Discharge the refrigerant. Refer to HFC-134A (R-134A) Service Procedure.
2. Reposition the power steering reservoir out of the way without disconnecting the hose.
3. Reposition the engine coolant reservoir out of the way without disconnecting the hose.
4. Remove the low-pressure pipe. Refer to Component.

CAUTION:
Cap or wrap the joint of the pipe with a suitable material such as vinyl tape to avoid the entry of contaminants.

Installation
Installation is in the reverse order of removal.

CAUTION:
- Replace the O-ring on the low-pressure pipe with a new one, then apply A/C oil to it for installation.
- After recharging the refrigerant, check for leaks. Refer to Checking Of Refrigerant Leaks.