ABS

WHEEL SENSORS


Removal and Installation












CAUTION:
- Be careful not to damage wheel sensor edge and sensor rotor teeth.
- When removing the front or rear wheel hub, first remove the wheel sensor from the wheel hub. Failure to do so may result in damage to the wheel sensor wires making the sensor inoperative.
- Pull out the wheel sensor, being careful to turn it as little as possible. Do not pull on the wheel sensor harness.
- Before installation, check if foreign objects such as iron fragments are adhered to the pick-up part of the sensor or to the inside of the hole in the wheel hub for the wheel sensor, or if a foreign object is caught in the surface of the mating surface for the sensor rotor. Fix as necessary and then install the wheel sensor.

FRONT WHEEL SENSOR

Removal
1. Remove front wheel and tire. Refer to Adjustment.
2. Partially front wheel fender protector. Refer to Coupe.
3. Remove wheel sensor bolt and wheel sensor.
4. Remove harness wire from mounts and disconnect wheel sensor harness connector.

Installation
Installation is in the reverse order of removal.

REAR WHEEL SENSOR

Removal
1. Remove rear wheel and tire. Refer to Adjustment.





2. Disconnect wheel sensor harness connector (1).
Arrow Indicates Front

3. Remove harness wire clips from rear suspension member.
4. Remove wheel sensor bolt and wheel sensor from rear wheel hub and bearing assembly.

Installation
Installation is in the reverse order of removal.