Refrigerant Pressure Sensor / Switch: Service and Repair

REFRIGERANT PRESSURE SENSOR


Removal and Installation for Refrigerant Pressure Sensor


REMOVAL
1. Discharge the refrigerant. Refer to HFC-134A (R-134A) Service Procedure.
2. Remove the front grille (sedan only). Refer to Coupe.
3. Remove the front fascia (coupe only). Refer to Coupe.





4. Disconnect the refrigerant pressure sensor connector and remove the refrigerant pressure sensor (1) from the liquid tank on the condenser.

CAUTION:
Do not damage the condenser fins.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Replace the O-ring of the refrigerant pressure sensor with a new one, then apply compressor oil to it when installing it.