LH & RH Front Anti-Pinch-Sedan

ENCODER

PASSENGER SIDE : Description

Detects condition of the front power window motor RH operation and transmits to power window and door lock/unlock switch RH as pulse signal.

ENCODER

PASSENGER SIDE : Diagnosis Procedure

Regarding Wiring Diagram information, refer to Power Window System - With Left Front Only Power Window Anti-Pinch.
1. CHECK ENCODER SIGNAL

1. Connect front power window motor RH.
2. Turn ignition switch ON.
3. Check signal between power window and door lock/unlock switch RH connector and ground with oscilloscope.

Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 2
2. CHECK FRONT POWER WINDOW MOTOR RH POWER SUPPLY

1. Turn ignition switch ON.
2. Check voltage between front power window motor RH connector and ground.

Is the measurement value within the specification?
YES - GO TO 4
NO - GO TO 3
3. CHECK HARNESS CONTINUITY 1

1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH and front power window motor RH.
3. Check continuity between power window and door lock/unlock switch RH connector (A) and front power window motor RH connector (B).

4. Check continuity between power window and door lock/unlock switch RH connector (A) and ground.

Is the inspection result normal?
YES - Replace power window and door lock/unlock switch RH. Refer to LH & RH Front Anti-Pinch-Sedan. After that, refer to Special Repair Requirement.
NO - Repair or replace harness.
4. CHECK GROUND CIRCUIT

1. Turn ignition switch OFF.
2. Disconnect front power window motor RH.
3. Check continuity between front power window motor RH connector and ground.

Is the inspection result normal?
YES - GO TO 6
NO - GO TO 5
5. CHECK HARNESS CONTINUITY 2

1. Disconnect power window and door lock/unlock switch RH.
2. Check continuity between power window and door lock/unlock switch RH connector (A) and front power window motor RH connector (B).

3. Check continuity between power window and door lock/unlock switch RH connector (A) and ground.

Is the inspection result normal?
YES - Replace front power window motor RH. Refer to Removal and Installation. After that, refer to LH & RH Front Anti-Pinch-Sedan.
NO - Repair or replace harness.