LH Only Anti-Pinch-Sedan

POWER WINDOW MOTOR


DRIVER SIDE : Description

Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch.





POWER WINDOW MOTOR


DRIVER SIDE : Diagnosis Procedure

Regarding Wiring Diagram information, refer to Power Window System - With Left And Right Front Power Window Anti-Pinch.

Front Power Window Motor LH Circuit Check
1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL
1. Turn ignition switch OFF.





2. Disconnect front power window motor LH.
3. Turn ignition switch ON.
4. Check voltage between front power window motor LH connector and ground.







Is the measurement value within the specification?
YES - GO TO 3
NO - GO TO 2
2. CHECK HARNESS CONTINUITY





1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch.
3. Check continuity between main power window and door lock/unlock switch connector (A) and front power window motor LH connector (B).






4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.





Is the inspection result normal?
YES - Replace main power window and door lock/unlock switch. Refer to LH Only Anti-Pinch-Sedan. After that, refer to LH Only Anti-Pinch-Sedan.
NO - Repair or replace harness.
3. CHECK FRONT POWER WINDOW MOTOR LH
Check front power window motor LH. Refer to LH Only Anti-Pinch-Sedan.
Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - Replace front power window motor LH. Refer to Removal and Installation. After that, refer to LH Only Anti-Pinch-Sedan.