B1210

B1209 - B1210 COLLISION DETECTION





Description

DTC B1209 - B1210 COLLISION DETECTION
The air bag diagnosis sensor unit will set this DTC if it has detected a collision which has resulted in a frontal or side deployment of one or more air bags or pre-tensioners. If this DTC is detected after a SRS repair, the air bag diagnosis sensor unit has not yet been replaced. This DTC can not be erased.

PART LOCATION
Refer to Locations.




DTC Logic

DTC DETECTION LOGIC

With CONSULT-III






DTC CONFIRMATION PROCEDURE (With CONSULT-III)
1.INSPECTION START
Turn ignition switch ON.
- GO TO 2.
2.CHECK SELF-DIAG RESULT
Check for the DTC on CONSULT-III.
Is the DTC detected?
YES - Refer to B1209.
NO - Inspection End.




Diagnosis Procedure (Component Diagnosis)
Refer to For Frontal Collision or For Side and Rollover Collision.