Sedan With Intelligent Key
B2560 STARTER CONTROL RELAY
Description
Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in N or P position.
DTC Logic
DTC DETECTION LOGIC
NOTE:
- If DTC B2560 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to Sedan With Intelligent Key.
- If DTC B2560 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to Sedan With Intelligent Key.
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON under the following conditions and wait for at least 2 seconds:
- CVT selector lever is in the P position.
- Depress the brake pedal.
2. Check "Self Diagnostic Result" with CONSULT-III.
Is DTC detected?
YES - Refer to Sedan With Intelligent Key.
NO - Inspection End.
Diagnosis Procedure
1.CHECK DTC WITH IPDM E/R
Check "Self Diagnostic Result" with CONSULT-III. Refer to Testing and Inspection.
Is the inspection result normal?
YES - GO TO 2
NO - Repair or replace malfunctioning parts.
2.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- Inspection End.