Without Navigation

ANTENNA AMP.


Removal and Installation - Sedan


REMOVAL

CAUTION:
- Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least three minutes.
1. Disconnect the negative and positive battery terminals, then wait at least three minutes.
2. Remove the rear pillar finisher RH. Refer to Sedan.
3. Partially remove the side curtain air bag module RH to gain access to the antenna amp. Refer to Removal And Installation.





4. Detach the antenna amp harness clip (A), disconnect the antenna amp connectors (B), remove the antenna amp screw
(C) and remove the antenna amp (1).

INSTALLATION
Installation is in the reverse order of removal.