Special Repair Requirement

INSPECTION AND ADJUSTMENT


ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

1.SAVING VEHICLE SPECIFICATION
-CONSULT-III Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to Description.

NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection".
- GO TO 2.
2.REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to AV Control Unit.
- GO TO 3.
3.WRITING VEHICLE SPECIFICATION
-CONSULT-III Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to Special Repair Requirement.
- GO TO 4.
4.OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
- WORK END