Coupe

FRONT FENDER


Removal and Installation


REMOVAL
1. Remove the head lamp. Refer to Removal and Installation.
2. Remove the inner fender bolt cover.
3. Remove the center mudguard. Refer to Coupe.
4. Remove the bolts and the front fender.

CAUTION:
- While removing, use a shop cloth to protect the body from damage.
- Use care when removing the front fender. The front fender baffle foam adheres the front fender to the body side outer. Carefully release the foam or damage to the fender may occur.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- After installing, apply touch-up paint (the body color) onto the head of the front fender bolts.

ADJUSTMENT
















1. Remove the inner fender bolt cover.
2. Remove the front fender protector. Refer to Coupe.
3. Remove the center mudguard. Refer to Coupe.
4. Loosen the front fender bolts and screws.
5. Adjust the clearance (J) and surface height (K) between the front fender and the front door.
6. Tighten the rear upper and lower front fender bolts.
7. Adjust the clearance (E) and surface height (F) between the front fender and the hood.
8. Adjust the clearance (M) and surface height (N) between the front fender and the body side outer.
9. Tighten the inner front fender bolts.
10. Adjust the clearance (G) and the surface height (H) between the front fender and the front fascia.
11. Tighten the front fender to front fascia and bracket screws.
12. Apply touch-up paint (the body color) onto the head of the front fender bolts.
13. Install the center mudguard. Refer to Coupe.
14. Install the front fender protector. Refer to Coupe.
15. Install the inner fender bolt cover.