Sedan

REAR SEAT


Removal and Installation


REMOVAL
1. Remove the rear seat cushion trim and pad.





- Pull the lock at the front bottom of the seat cushion forward
(one for each side), and pull the seat cushion upward to release the wire from the plastic hook, then pull the seat cushion forward to remove.
2. Remove the seat belt webbing from the guides.
3. Fold seatbacks forward.
4. Remove upper seatback trim panel.
5. Remove rear side bolster bolts.
6. Lock seatbacks in upright position.
7. Remove the seatback hinge anchor bolts and nut.
8. Remove the seatback assembly.

INSTALLATION
Installation is in the reverse order of removal.