Timing Cover: Specifications

Timing Cover



Front







Loosely install the front timing chain case bolts.







Tighten the front timing chain case bolts in the order as shown.
- Retighten the front timing chain case bolts in the order as shown.








Rear

Align the rear timing chain case and water pump assembly with the dowel pins (RH and LH) on the cylinder block and install the case. Make sure the O-rings stay in place during installation.
a. Tighten the bolts in the numerical order as shown. There are two bolt lengths used. Follow the chart below for proper bolt length specifications.











b. After all bolts are initially tightened, retighten them to the specification in the numerical order as shown.