IPDM E/R (Intelligent Power Distribution Module Engine Room)

POWER SUPPLY AND GROUND CIRCUIT


IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) : Diagnosis Procedure

Regarding Wiring Diagram information, refer to Coupe (coupe) or Sedan (sedan).
1. CHECK FUSES AND FUSIBLE LINK
Check that the following IPDM E/R fuses or fusible link are not blown.





Is the fuse blown?
YES - Replace the blown fuse or fusible link after repairing the affected circuit.
NO - GO TO 2
2. CHECK POWER SUPPLY CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect IPDM E/R connectors.
3. Check voltage between IPDM E/R harness connector and ground.






Is the measurement value normal?
YES - GO TO 3
NO - Repair harness or connector.
3. CHECK GROUND CIRCUIT





Check continuity between IPDM E/R harness connectors and ground.





Does continuity exist?
YES - Inspection End.
NO - Repair harness or connector.