Windshield Washer Switch: Service and Repair

FRONT WIPER AND WASHER SWITCH


Removal and Installation












NOTE:
Shown with steering wheel removed for clarity only.

REMOVAL
1. Unlock steering wheel.
2. Disconnect battery.

CAUTION:
- Before servicing, disconnect both battery terminals and wait at least three minutes.
- Do not use air tools or electric tools for servicing.
- After the work is completed, make sure no system malfunction is detected by air bag warning lamp.
- In case a malfunction is detected by the air bag warning lamp, reset with the self-diagnosis function and delete the memory with CONSULT-III.
- If a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunctions. Refer to Component Tests and General Diagnostics.
3. Remove steering column covers. Refer to Exploded View.
4. Rotate steering wheel clockwise to access first combination switch mounting bolt. Remove bolt.
5. Rotate steering wheel counter-clockwise to access second combination switch mounting bolt. Remove bolt, disconnect electrical connectors and combination switch.

INSTALLATION
Installation is in the reverse order of removal.