System Specifications

CYLINDER BLOCK










AVAILABLE PISTON






PISTON RING










PISTON PIN






CONNECTING ROD






CRANKSHAFT












MAIN BEARING




















CONNECTING ROD BEARING
















Main Bearing Cap






After installing the crankshaft, lower main bearings, main bearing caps, main bearing beam, and bearing cap bolts. Tighten the bearing cap bolts in the numerical order as shown.

Tighten the bolts in two stages:

CAUTION:
Measure the tightening angle in stage 2 using Tool. Do not measure visually.












Crankshaft Pulley






Install crankshaft pulley and tighten the bolt in two steps.
- Lubricate thread and seat surface of the bolt with new engine oil.
- Apply a paint mark for the second step of angle tightening.