LH Only Anti-Pinch-Sedan

ENCODER


DRIVER SIDE : Description

Detects condition of the front power window motor LH operation and transmits to main power window and door lock/unlock switch as pulse signal.





ENCODER


DRIVER SIDE : Diagnosis Procedure

Regarding Wiring Diagram information, refer to Power Window System - With Left And Right Front Power Window Anti-Pinch.

Encoder Circuit Check
1. CHECK ENCODER OPERATION





1. Connect front power window motor LH.
2. Turn ignition switch ON.
3. Check signal between main power window and door lock/unlock switch connector and ground with oscilloscope.










Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 2
2. CHECK FRONT POWER WINDOW MOTOR LH POWER SUPPLY





1. Turn ignition switch ON.
2. Check voltage between front power window motor LH connector and ground.





Is the measurement value within the specification?
YES - GO TO 4
NO - GO TO 3
3. CHECK HARNESS CONTINUITY 1





1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch and front power window motor LH.
3. Check continuity between main power window and door lock/unlock switch connector (A) and front power window motor connector (B).





4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.





Is the inspection result normal?
YES - Replace main power window and door lock/unlock switch. Refer to LH Only Anti-Pinch-Sedan, "Removal and
LH Only Anti-Pinch-Sedan.
NO - Repair or replace harness.
4. CHECK GROUND CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect front power window motor LH.
3. Check continuity between front power window motor LH connector and ground.





Is the inspection result normal?
YES - GO TO 6
NO - GO TO 5
5. CHECK HARNESS CONTINUITY 2





1. Disconnect main power window and door lock/unlock switch.
2. Check continuity between main power window and door lock/unlock switch connector (A) and front power window motor LH connector (B).





Is the inspection result normal?
YES - Replace main power window and door lock/unlock switch. Refer to LH Only Anti-Pinch-Sedan. After that, refer to LH Only Anti-Pinch-Sedan.
NO - Repair or replace harness.
6. CHECK HARNESS CONTINUITY 3





1. Disconnect main power window and door lock/unlock switch.
2. Check continuity between main power window and door lock/unlock switch connector (A) and front power window motor LH connector (B).





3. Check continuity between main power window and door lock/unlock switch connector (A) and ground.





Is the inspection result normal?
YES - Replace front power window motor LH. Refer to Removal and Installation. After that, refer to LH Only Anti-Pinch-Sedan.
NO - Repair or replace harness.