B26F6

B26F6 BCM





Description
BCM controls the various electrical components and simultaneously supplies power according to the power supply position.
BCM checks the power supply position internally.




DTC Logic

DTC DETECTION LOGIC

NOTE:
- If DTC B26F6 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. With Intelligent Key System.
- If DTC B26F6 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. With Intelligent Key System.






DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON under the following conditions, and wait for 1 second or more.
- Selector lever is in the P or N position
- Do not depress brake pedal
2. Check "Self-diagnosis result" with CONSULT-III.
Is DTC detected?
YES - Go to B26F6.
NO - INSPECTION END




Diagnosis Procedure
1.INSPECTION START
1. Turn ignition switch ON.
2. Select "Self-diagnosis result" mode with CONSULT-III.
3. Touch "ERASE".
4. Perform DTC Confirmation Procedure.
See B26F6.
Is DTC detected?
YES - Replace BCM. Removal And Installation
NO - INSPECTION END