With Intelligent Key System

BACK DOOR


DOOR CHECK LINK : Removal and Installation


REMOVAL
1. Remove back door finisher lower. Removal And Installation.
2. Remove sealing screen.

NOTE:
Cut the butyl-tape so that some part of the butyl-tape do not remain on the sealing screen, if the sealing screen is reused.
3. Remove mounting bolts of door check link on the vehicle.
4. Remove mounting nuts of door check link on the back door panel.
5. Take door check link out from the hole of back door panel.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Check back door open/close operation after installation.