Disassembly And Assembly
FRONT SEAT
Disassembly and Assembly
DISASSEMBLY
1. Remove the armrest assembly.
- Remove the armrest cap.
- Remove the mounting bolt, and then remove armrest assembly.
2. Remove the seatback trim and seatback pad.
- Remove the seatback retainer (1), and then open the fastener (2).
- Remove the seatback retainer from seatback inside.
- Remove the headrest holder.
CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
- Remove the side air bag module mounting nuts.
- Remove the seatback trim and seatback pad from the seatback frame.
- Remove the hog rings, and separate the seatback trim and seatback pad.
3. Remove the seatback silencer.
4. Remove the seat cushion outer finisher.
- Remove the pawls, and then lifter lever knob finisher (1). (Driver's seat only)
Broken Triangle Indicates : Pawl
- Remove the mounting screws, and remove the lifter lever (2). (Driver's seat only)
- Pull out the reclining lever while holding and raising the pawl.
Broken Triangle Indicates : Pawl
- Remove the metal clip and pawls, and then pull out seat cushion outer finisher outside.
5. Remove the metal clip and pawls, and then pull out seat cushion inner finisher.
6. Remove the seat belt buckle. Removal And Installation.
7. Remove the seat cushion trim and seat cushion pad.
- Remove the seat cushion trim retainer.
- Remove the seat cushion trim and seat cushion pad from the seat cushion frame.
- Remove the hog rings, and separate the seat cushion trim and seat cushion pad.
8. Remove the seat cushion silencer.
9. Remove the reclining device cover.
- Remove the screws, and then reclining device outer cover (front, rear).
- Remove the screws, and then reclining device inner cover (front, rear).
10. Remove the mounting bolt, and then remove seatback frame.
11. Remove the seat cushion mat.
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat trim in position, and then securely connect the trim or trim cord with the pad side wire.