Units

HOW TO USE THIS MANUAL


Relation between Illustrations and Descriptions

The following sample explains the relationship between the part description in an illustration, the part name in the text and the service procedures.









HOW TO USE THIS MANUAL


Units

- The UNITS given are primarily expressed as the SI UNIT (International System of Unit), and alternatively expressed in the metric system and in the yard/pound system.
Also with regard to tightening torque of bolts and nuts, there are descriptions both about range and about the standard tightening torque.
"Example"
Range

Outer Socket Lock Nut : 59 - 78 N.m (6.0 - 8.0 kg-m, 43 - 58 ft-lb)


Standard

Drive Shaft Installation Bolt : 44.3 N.m (4.5 kg-m, 33 ft-lb)





HOW TO USE THIS MANUAL


Terms

- The captions WARNING and CAUTION warn you of steps that must be followed to prevent personal injury and/or damage to some part of the vehicle.
WARNING indicates the possibility of personal injury if instructions are not followed.
CAUTION indicates the possibility of component damage if instructions are not followed.
BOLD TYPED STATEMENTS except WARNING and CAUTION give you helpful information.
Standard value: Tolerance at inspection and adjustment.
Limit value: The maximum or minimum limit value that should not be exceeded at inspection and adjustment.