Removal and Installation

WATER PUMP


Removal and Installation


REMOVAL
1. Drain engine coolant from radiator. Draining.

CAUTION:
- Perform this step when the engine is cold.
- Never spill engine coolant on drive belt.
2. Remove front fender protector (RH). Exploded View.
3. Remove drive belt. Removal And Installation.
4. Remove water pump.
- Engine coolant leakage from cylinder block, so have a receptacle ready below.

CAUTION:
- Handle water pump vane so that it does not contact any other parts.
- Water pump cannot be disassembled and should be replaced as a unit.

INSTALLATION
Install in the reverse order of removal.