System Description

METER SYSTEM


METER ILLUMINATION CONTROL : System Description


METER ILLUMINATION ON/OFF CONTROL FUNCTION
The combination meter receives the following signals to control meter illumination.






Turns ON Condition
Ignition switch ON

Turns OFF Condition
If any of the following conditions is fulfilled.
- During a crank with vehicle speed less than 1 km/h (0.6 MPH)
- Ignition switch OFF or ACC

METER ILLUMINATION CONTROL FUNCTION
- Combination meter is transferred to nighttime mode with position light request signal from BCM via CAN communication.


- Meter illumination level can be adjusted in following steps using the illumination control switch (1).