Aiming Adjustment Procedure

FRONT FOG LAMP AIMING ADJUSTMENT


Aiming Adjustment Procedure

1. Place the screen.

NOTE:
- Stop the vehicle facing the wall.
- Place the board on a plain road vertically.
2. Face the vehicle with the screen. Maintain 10 m (32.8 ft) between the front fog lamp center and the screen.
3. Start the engine. Illuminate the front fog lamp.

CAUTION:
Never cover the lens surface with a tape etc. The lens is made of resin.

NOTE:
Shut off the headlamp light with the board to prevent from illuminating the adjustment screen.
4. Adjust the cutoff line height (A) with the aiming adjustment screw so that the distance (X) between the horizontal center line of front fog lamp (H) and (A) becomes 200 mm (7.87 in).



Front fog lamp light distribution on the screen