Removal And Installation

SIDE TURN SIGNAL LAMP


Removal and Installation


CAUTION:
Disconnect battery negative terminal or remove the fuse.

REMOVAL
1. Remove the side turn signal lamp in numerical order shown in the figure.






White Arrow Indicates : Installable both direction

2. Rotate the bulb socket counterclockwise and unlock it.

NOTE:
Support side turn signal lamp harness with tape so that it won't fall into the front fender.

INSTALLATION
1. Rotate the bulb socket clockwise and lock it.
2. Fix the pawl-side behind the side turn signal lamp housing first, then push the resin clip-side.