Oil Filter: Service and Repair

OIL FILTER


Removal and Installation


REMOVAL
1. Remove engine under cover. Exploded View.





2. Using oil filter wrench [SST: KV10115801 (J-38956)] (A), remove oil filter.

Arrow Indicates : Vehicle front

CAUTION:
- Oil filter is provided with relief valve. Use genuine NISSAN oil filter or equivalent.
- Be careful not to get burned when engine and engine oil may be hot.
- When removing, prepare a shop cloth to absorb any engine oil leakage or spillage.
- Completely wipe off any engine oil that adheres to engine and vehicle.

INSTALLATION
1. Remove foreign materials adhering to the oil filter installation surface.





2. Apply new engine oil to the oil seal contact surface of new oil filter.





3. Screw oil filter manually until it touches the installation surface, then tighten it by 2/3 turn (A). Or tighten to specification.








OIL FILTER


Inspection


INSPECTION AFTER INSTALLATION
1. Check the engine oil level. Inspection.
2. Start the engine, and check that there is no leakage of engine oil.
3. Stop the engine and wait for 10 minutes.
4. Check the engine oil level, and adjust the level. Inspection.