Draining

CLUTCH FLUID


Draining


CAUTION:
Keep painted surface on the body or other parts free of clutch fluid. If it spills, wipe up immediately and wash the affected area with water.





1. Connect a transparent vinyl hose to air bleeder of bleeding connector (1).





2. Press the lock pin (1) into the bleeding connector (2), and maintain the position.










3. Slide bleeding connector (1) in the direction of the arrow as shown in the figure.

4. Depress clutch pedal to gradually discharge clutch fluid.

CAUTION:
Since the inside of clutch tube is under hydraulic pressure, hold the tube to prevent it from getting disconnected.