Refilling

CLUTCH FLUID


Refilling


CAUTION:
Keep painted surface on the body or other parts free of clutch fluid. If it spills, wipe up immediately and wash the affected area with water.
1. Check that there is no foreign material in reservoir tank and then fill with new clutch fluid.

CAUTION:
Never reuse drained clutch fluid.





2. Connect a transparent vinyl hose to air bleeder of bleeding connector (1).





3. Press the lock pin (1) into the bleeding connector (2), and maintain the position.

4. Slide bleeding connector (1) in the direction of the arrow as shown in the figure.










5. Slowly depress clutch pedal to the full stroke position and then release the pedal.

CAUTION:
Since the inside of clutch tube is under hydraulic pressure,
hold the tube to prevent it from getting disconnected.
6. Repeat step 5 at intervals of 2 or 3 seconds until new clutch fluid is discharged.

CAUTION:
Monitor clutch fluid level in reservoir tank so as not to empty the tank.
7. Return clutch tube and lock pin in their original positions while clutch pedal is depressed.
8. Perform the air bleeding. Air Bleeding Procedure.