Changing

CVT FLUID


Changing

1. Remove drain plug from oil pan and then the CVT fluid.
2. Remove drain plug gasket from drain plug.
3. Install drain plug gasket to drain plug.

CAUTION:
Never reuse drain plug gasket.
4. Install drain plug to oil pan.

Torque: Exploded View

5. Fill CVT fluid from CVT fluid charging pipe to the specified level.

CVT fluid and fluid capacity : General Specifications

CAUTION:
- Always use the specified fluid. If use, misuse, or mixing of fluid other than the specified fluid occurs, original performance cannot be obtained or it may cause serious malfunctions.
- CVT fluid is not reusable. Never reuse CVT fluid.
- Always use shop paper. Never use shop cloth.
- After replacement, always perform CVT fluid leakage check.
- Delete CVT fluid deterioration date with CONSULT-III after changing CVT fluid.
6. After engine warms up, drive the vehicle in an urban area for approximately 10 minutes.

NOTE:
When ambient temperature is 20�C (68�F), it takes about 10 minutes for the CVT fluid to warm up to 50 to 80�C (122 to 176�F).
7. Check CVT fluid level and condition. Inspection.
8. Repeat steps 1 to 6 if CVT fluid has been contaminated.