Maintenance Indicator Reset

Maintenance Information (Canada only)

When the ignition switch is placed in the ON position, maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns of.

The wrench symbol appears when the set distance comes for changing an item, such as engine oil.

To set the distance to change an item:

1. Place the ignition switch in the ON position.
Push the trip computer mode switch "A" for 3 seconds while the wrench symbol and maintenance information are displayed. The symbol and distance display will start flashing and the display shows the current interval.

2. Push the switch "A" to increase the interval distance.
Each step increases the interval distance 500 miles (1,000 km). The interval distance can be set up to 18,000 miles (30,000 km) after the display returns to 0 (zero).

3. If no further action is made, the display returns to the previous mode and the new interval is set.

If the interval distance is set to 0, the display will skip the maintenance information when the ignition switch is placed to the ON position.