Rear Wheel Hub

REAR WHEEL HUB


Inspection


COMPONENT PART
Check the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal.

WHEEL HUB AND BEARING ASSEMBLY
Check the following items, and replace the part it necessary.
- Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel bearing.

Axial end play : Rear Axle

- Rotate wheel hub and bearing assembly and check there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub and bearing assembly.





REAR WHEEL HUB


Inspection


INSPECTION AFTER REMOVAL
Check the wheel hub and bearing assembly for wear, cracks, and damage. Replace if necessary.

INSPECTION AFTER INSTALLATION
1. Check wheel sensor harness for proper connection. Exploded View.
2. Adjust parking brake operation (stroke). Component Tests and General Diagnostics.
3. Check wheel alignment. Rear Suspension.