Diagnosis Procedure

SHIFT POSITION INDICATOR CIRCUIT


Description

TCM transmits shift position signal to combination meter via CAN communication. The actual shift position is displayed on combination meter according to the signal.





SHIFT POSITION INDICATOR CIRCUIT


Diagnosis Procedure

1.CHECK TCM INPUT AND OUTPUT SIGNALS
With CONSULT-III
1. Start the engine.
2. Select "Data Monitor" in "TRANSMISSION".
3. Select "RANGE".
4. Shift selector lever.
5. Check that selector lever position, "RANGE" on CONSULT-III screen, and shift position indicator display on combination meter are identical.
Is the inspection result normal?
YES - INSPECTION END
NO-1 ("RANGE" is changed but is not displayed on shift position indicator.)-Select "Self Diagnostic Results" in "TRANSMISSION".
NO-2 ("RANGE" differs from shift position indicator.)-Select "Self Diagnostic Results" in "TRANSMISSION".
NO-3 (Specific"RANGE" is not displayed on shift position indicator.)-Select "Self Diagnostic Results" in "METER/M&A".