Cruise Test

ROAD TEST


Cruise Test


CAUTION:
Always drive vehicle at a safe speed.
1.CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 1)
1. Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.
CVT fluid operating temperature: 50 - 80�C (122 - 176�F)
2. Park vehicle on level surface.
3. Shift selector lever to "P" position.
4. Start the engine.
5. Shift selector lever to "D" position.
6. Accelerate vehicle at 2/8 throttle opening.
7. Check "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears.
With CONSULT-III
- Read "ACC PEDAL OPEN", "VEHICLE SPEED" and "ENG SPEED".
Is the inspection result normal?
YES - GO TO 2.
NO - 1. Record malfunction symptoms.
2. GO TO 2.
2.CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 2)
1. Park vehicle on level surface.
2. Shift selector lever to "D" position.
3. Accelerate vehicle at 8/8 throttle opening.
4. Check "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears.
With CONSULT-III
- Read "ACC PEDAL OPEN", "VEHICLE SPEED" and "ENG SPEED".
Is the inspection result normal?
YES - GO TO 3.
NO - 1. Record malfunction symptoms.
2. GO TO 3.
3.CHECK OVERDRIVE OFF CONDITION (PART 1)
1. Park vehicle on level surface.
2. Push overdrive control switch.
3. Accelerate vehicle at 2/8 throttle opening.
4. Check "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears.
With CONSULT-III
- Read "ACC PEDAL OPEN", "VEHICLE SPEED" and "ENG SPEED".
Is the inspection result normal?
YES - GO TO 4.
NO - 1. Record malfunction symptoms.
2. GO TO 4.
4.CHECK OVERDRIVE OFF CONDITION (PART 2)
1. Park vehicle on level surface.
2. Push overdrive control switch.
3. Accelerate vehicle at 8/8 throttle opening.
4. Check "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears.
With CONSULT-III
- Read "ACC PEDAL OPEN", "VEHICLE SPEED" and "ENG SPEED".
Is the inspection result normal?
YES - GO TO 5.
NO - 1. Record malfunction symptoms.
2. GO TO 5.
5.CHECK "L" POSITION FUNCTION (PART 1)
1. Park vehicle on level surface.
2. Shift selector lever to "L" position.
3. Accelerate vehicle at 2/8 throttle opening.
4. Check "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears.
With CONSULT-III
- Read "ACC PEDAL OPEN", "VEHICLE SPEED" and "ENG SPEED".
Is the inspection result normal?
YES - GO TO 6.
NO - 1. Record malfunction symptoms.
2. GO TO 6.
6.CHECK "L" POSITION FUNCTION (PART 2)
1. Park vehicle on level surface.
2. Shift selector lever to "L" position.
3. Accelerate vehicle at 8/8 throttle opening.
4. Check "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears.
With CONSULT-III
- Read "ACC PEDAL OPEN", "VEHICLE SPEED" and "ENG SPEED".
Is the inspection result normal?
YES - GO TO 7.
NO - 1. Record malfunction symptoms.
2. GO TO 7.
7.CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce vehicle speed in "L" position?
YES - 1. Stop vehicle.
2. Perform "Self Diagnostic Results" in "TRANSMISSION".
NO - 1. Record malfunction symptoms.
2. Perform self-diagnosis. Symptom Related Diagnostic Procedures.