Removal And Installation

YAW RATE/SIDE G SENSOR


Removal and Installation


REMOVAL

CAUTION:
- Never drop or strike yaw rate/side G sensor, or never use power tool etc., because yaw rate/side G sensor is sensitive to the impact.
1. Remove front (left side) seat. Exploded View.
2. Remove dash side finisher and front kicking plate inner. Exploded View.
3. Remove floor trim. Exploded View.
4. Disconnect yaw rate/side G sensor harness connector.
5. Remove yaw rate/side G sensor.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Never drop or strike yaw rate/side G sensor, or never use power tool etc., because yaw rate/side G sensor is sensitive to the impact.