Emissions - EVAP Canister Vent Control Valve Replacement
Classification: EC09-025Reference: NTB09-129
Date: November 17, 2009
VENT CONTROL VALVE REPLACEMENT
APPLIED VEHICLES:
All Nissan models using Vent Control Valve P/Ns 14935-AM60A / AM60B
SERVICE INFORMATION
When replacing the EVAP canister vent control valve for any reason:
^ Use the one listed in the PARTS INFORMATION section of this bulletin.
^ For vent control valve replacement procedure, refer to the appropriate section of the Electronic Service Manual (ESM) if needed.
^ When installing the new valve, do not add any lube to its o-ring.
^ For Frontier (D40 series) only: install the protector listed in PARTS INFORMATION.
> For protector installation, see the SERVICE PROCEDURE section of this bulletin.
^ Make sure to use the "new style" valve listed in PARTS INFORMATION.
PARTS INFORMATION
CLAIMS INFORMATION
SERVICE PROCEDURE
Frontier (D40 series) only: Install Protector
1. Wrap the protector around the EVAP hose (see Figure 1 and 2).
^ Locate the protector between the hose and the vent control valve.
2. Secure the protector with two tie straps.