Trunk / Liftgate: Service and Repair

TRUNK LID


TRUNK LID ASSEMBLY : Removal and Installation


REMOVAL
1. Remove trunk lid finisher. Removal And Installation.
2. Disconnect the connectors in the trunk lid, remove the harness clips, and pull the harness out of the trunk lid.
3. Remove the nuts, and the trunk lid assembly.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- After installing, apply touch-up paint (the body color) onto the head of the hinge nuts.
- After installing, check operation.
- After installing, perform fitting adjustment. Adjustments.