Removal And Installation

TRUNK ROOM TRIM & TRUNK LID FINISHER


Removal and Installation


REMOVAL

TRUNK ROOM TRIM
1. Release the latch, then position rear seatback (RH/LH) to the folded down position, if equipped.
2. Remove trunk floor carpet clips (if equipped), then remove the trunk floor carpet.
3. Remove the trunk net rear and the trunk net side (if installed).
4. Remove the clips, then remove the trunk rear finisher.
5. Remove the clips, then remove the upper trunk finisher.
6. Remove the clips, then remove the trunk forward carpet.
7. Release the clips, then remove trunk side finishers (RH/LH).
8. Remove spare tire foam board cover and the forward floor foam board spacer.
9. Remove the trunk lid rubber bumpers (RH/LH), detach the trunk pull handle release, then remove the clips and remove trunk lid finisher.

INSTALLATION
Installation is in the reverse order of removal.