Removal And Installation

DOOR LOCK


BACK DOOR LOCK : Removal and Installation


REMOVAL
1. Remove rear door finisher. Removal And Installation.
2. Remove sealing screen.
3. Fully close the rear door glass.





4. Remove door side grommet, and loosen TORX bolt from grommet hole.





5. While pulling outside handle, remove outside handle escutcheon.





6. While pulling outside handle, slide toward rear of vehicle to remove outside handle.
7. Remove front gasket and rear gasket.





8. While pulling outside handle bracket, slide toward rear of vehicle to remove outside handle bracket.
9. Separate the outside handle cable connection from the outside handle bracket.
10. Remove door lock bolts.
11. Remove door lock assembly.

INSTALLATION
Installation in the reverse order of removal.

CAUTION:
Check door open/close, lock/unlock operation after installation.