Sunshade Motor Assembly

POWER SUPPLY AND GROUND CIRCUIT


SUNSHADE MOTOR ASSEMBLY : Diagnosis Procedure

Regarding Wiring Diagram information, Sunshade Motor Assembly.
1.CHECK POWER SUPPLY





1. Turn ignition switch OFF.
2. Disconnect sunshade motor assembly connector.
3. Turn ignition switch ON.
4. Check voltage between sunshade motor assembly harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - GO TO 3.
2.CHECK GROUND CIRCUIT





1. Turn ignition switch OFF.
2. Check continuity between sunshade motor assembly harness connector and ground.





Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the harness.
3.CHECK SUNSHADE MOTOR CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect BCM connector.
3. Check continuity between BCM harness connector (A) and sunshade motor assembly harness connector (B).










4. Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES - Replace BCM. Body Control System.
NO - Repair or replace the harness.
4.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- Inspection End.