Diagnosis Procedure

SLIDING MOTOR


Description

- The sliding motor LH is installed to the seat frame.
- The sliding motor LH is activated with the driver seat control unit.
- The seat is slid forward/backward by changing the rotation direction of sliding motor LH.




SLIDING MOTOR


Diagnosis Procedure

Regarding Wiring Diagram information, Driver Seat Control Unit.
1. CHECK SLIDING MOTOR LH POWER SUPPLY
1. Turn the ignition switch to ACC.
2. Perform "Active test" ("SEAT SLIDE") with CONSULT-III
3. Check voltage between driver seat control unit harness connector and ground.





Is the inspection result normal?
YES - Replace front power seat LH [sliding motor]. With Climate Controlled Seats.
NO - GO TO 2
2. CHECK SLIDING MOTOR LH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect driver seat control unit and front power seat LH [sliding motor].
3. Check continuity between driver seat control unit harness connector and front power seat LH [sliding motor] harness connector.





4. Check continuity between driver seat control unit harness connector and ground.





Is the inspection result normal?
YES - GO TO 3
NO - Repair or replace harness.
3. CHECK INTERMITTENT INCIDENT
Intermittent Incident.
Is the inspection result normal?
YES - Replace driver seat control unit. Driver Seat Control Unit.
NO - Repair or replace the malfunctioning part.